BBSCR - X-3D WOOD STAIN #804-807/812/816-819/825
- MSDS: BBSCR
- Manufacturer: THE FLECTO INC
- Product Name: X-3D WOOD STAIN #804-807/812/816-819/825
- National Stock Number: 8010-00F005271
Product Identification
Product ID:X-3D WOOD STAIN #804-807/812/816-819/825
MSDS Date:01/01/1987
FSC:8010
NIIN:00F005271
MSDS Number: BBSCR
Responsible Party
Emergency Phone: (415) 655-2470
Cage: FO041
Contractor
Telephone: 800-635-3286
Cage: FO041
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 24%
OSHA PEL 100 PPM
ALIPHATIC PETROLEUM DISTILLATES (KEROSENE) (VAPOR PRESSURE
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 21%
ACGIH TLV: 100 PPM
Hazards
Effects of Overexposure:INHALATION: CAUSE RESP TRACT
IRRIT/HEADACHE/DIZZINESS/STAGGERING GAIT/CONFUSION/UNCONSCIOUSNESS
First Aid
First Aid:SKIN: WASH AFFECTED AREAS W/SOAP & WATER. CONSULT PHYSICIAN
IF IRRITATION PERSISTS. INHALATION: REMOVE TO FRESH AIR, RESTORE
BREATHING, CONSULT PHYSICIAN. EYES: FLUSH W/LARGE AMTS OF WATER FOR
15 MINS . TAKE A PHYSICIAN FOR MEDICAL TREATMENT.
Fire Fighting
Flash Point:105F TCC
Lower Limits:1.0%
Extinguishing Media:FOAM, ALCOHOL, CO2, DRY CHEMICAL.
Unusual Fire/Explosion Hazard:HEAVY SOLVENT VAPORS COLLECT IN LOW
AREAS. ELIMINATE IGNITION SOURCES IF POSSIBLE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, AVOID
BREATHING VAPORS. VENTILATE & REMOVE WITH INERABSORBENT.
Handling
Handling and Storage Precautions:DON'T STORE IN A HIGH TEMPERATURE AREA
OR NEAR FIRE OR OPEN FLAME.
Other Precautions:DON'T STORE OR USE NEAR HEAT, SPARKS OR FLAMES. DON'T
GET IN EYES. DON'T TAKE INTERNALLY. KEEP AWAY FROM CHILDREN.
Exposure Controls
Ventilation:REMOVE HEAVY SOLVENT VAPORS, IGNITION SOURCES
Protective Gloves:NEOPRENE/RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
MSDS DATE: 07/02/84. WT/GAL: 9.58 - 10.32
Chemical Properties
Boiling Pt:B.P. Text:315-390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:65.8
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:NORMAL PAINT DISPOSAL METHODS. DON'T INCINERATE
IN CLOSED CONTAINERS. DISPOSAL SHOULD BE DONE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.